background image

FUNZIONAMENTO

I

OPERATION

GB

14

Power limiter

power button, and simultaneously press the timer and - buttons.

To permanently deactivate the Child-Lock function:simultaneously press the power button and 

the - button, the command will emit a "beep", at this point press the timer button again to confirm.

The hob is equipped with power limiters that are able to limit its total maximum consumption: to 

activate this function, firstly turn off the power supply to the hob and turn it on again; press the 

timer button and, while holding it down, press the - button, the hob will emit a "beep" and, while 

still holding the timer button down, press the button corresponding the cooking zone on the 

bottom left.The hob will emit an additional confirmation beep and two displays will light up: the 

upper one with a number from 00 to 02, the lower one with the writing C0.By pressing the button 

for the cooking zone on the bottom left you can scroll through the various settings of the power 

limiter, shown on the upper display according to the following order:

- 00-> limiter off, maximum consumption 11.1 kW (factory setting)

- 01-> limiter activated with maximum consumption 7.4 kW

- 02 -> limiter activated with maximum consumption 4.5 kW

Once you have chosen the desired setting, press the - button followed by the power button to 

finish the procedure.

CAUTION:During this procedure do not touch any button other than those indicated!If this 

happens inadvertently, disconnect the power supply and restart the selection from the beginning.

Summary of Contents for 5II94290





















Reviews: