English
21
How to use your TV with a Sky Digital set top box
Option 1) Connecting your TV to your Sky box (when both the TV and Sky
Box are located in the same room)
Depending on your Sky Box and TV model, connect either by SCART (or if no SCART connector is
included with your TV, connect via a SCART to AV cable) or via an HDMI cable (SCART to AV and HDMI
cables are available separately)
If connecting by SCART cable to both the Sky Box and TV, select the ‘input source’ as SCART.
If connecting by SCART to AV cable (SCART on one end connected to your Sky box and a Red/White
and Yellow connector on the other end that connects to the TV) select the ‘input source’ as AV.
If connecting by HDMI, select the ‘Input source’ on the TV as HDMI (if the TV has more than 1 HDMI
port, ensure you select the input source to match the HDMI numbered port on the rear of the TV)
If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control
(Revision 9 or later) and you will need to programme a 4 digit code into it. See bottom of this page.
Option 2) Connecting your TV to your Sky box (when your Sky box is
located in a diff erent room to the TV)
Please note, if you are adding a ‘Magic Eye/TV
Link’ to your system so that you can use your
Sky remote control to change the Sky channel
in the room where the 2nd TV is located,
please refer to the instructions included with
the TV link/magic eye in order to ensure the
RF or RF2 output on your Sky box is powered
on. (The red LED light on the TV link/magic eye
will light up if the RF / RF2 output is correctly
set up) If you do not have the instructions that
came with the TV link/magic eye, instructions
on how to do it can be found on our web site.
1) To tune the TV to the Sky box, on the 2nd
TV, select the ‘Analogue’ input source.
2) Select the channel that you wish to store
the Sky box/channel on. (If you do not use channels 1-5 because you no longer have analogue terrestrial channels after digital
switchover, you may choose to select channel 1 to store the Sky box/channel, if you still have and use analogue channels 1-5,
you may for example decide that channel 6 is the best option for you)
3) Press the corresponding number on the remote control to select the desired analogue channel chosen as per point 2 above.
4) On the TV remote control, press Menu. Now navigate through the menus to select Manual Tuning or Analogue Manual
tuning (refer to the Tuning/Channel menu section of this user guide if necessary)
5) Manually tune in the channel (usually, the Sky box is at a frequency between 800Mhz and 850Mhz) once the Sky box/
channel is found, press ‘OK’ to store it.
If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control (Revision 9 or later) and
you will need to programme a 4 digit code into it. See below.
Sky Box
SCART
or HDMI
cable
RF/COAX cable from
Sky Box to 2nd TV
Connect to RF
or RF2 output
on the Sky box
Connect to the
Aerial/RF input
on the 2nd TV
TV Link/Magic Eye
(optional)
2nd TV in
another room
Sky Box
SCART
or HDMI
cable
Using a Sky Remote or a Universal Remote to operate your TV
Sky Remote Control,
If you wish to use your Sky remote to operate the basic functions of your TV, you need to programme
a 4 digit code into it. Please note. you will need the latest Sky Revision 9 remote control as this is the only version that
includes the latest software/fi rmware necessary to operate this model of TV. All codes can be found on our website. If you
wish to upgrade/replace your existing Sky remote control to the latest version, you can do so on our web site.
Universal Remote Control,
If you wish to use a Universal remote control to operate your TV, please refer to the web site
for a full list of codes. (Please note we only have codes for One for All branded remote controls, if you have an alternative
brand of Universal remote, please refer to the manufacturer for the code.)
Manual - Blaupunkt - 32-56G-GB-3B-F3TCU-UK.indd 21
Manual - Blaupunkt - 32-56G-GB-3B-F3TCU-UK.indd 21
09-Aug-12 9:07:08 AM
09-Aug-12 9:07:08 AM