Blaupunkt 32-188G-GB-5B-FTCU-UK, User Manual, Page: 6 / 24

8
Attaching the stand
To complete stand installation you will need a Philips
screwdriver
Prior to stand assembly you must fi x the stand holder to the
backside of TV with the screws provided in accessory bag
(if stand holder is not assembled already)
Once this has been done you may proceed with the stand
assembly itself.
1. Align the stand (B) with 2 plastic bolts of the TV neck (A).)
2. Screw the base plate (B) Now with the screws (C) fi xed to the
(bolted to the TV) stand
Wall mounting the TV
This television requires a VESA 435 x 200 wall mount,
or equivalent.
TV VESA Standard
32“ TV 200 x 100
40“ TV 400 x 400
1. Remove the four screws highlighted below.
2. The wall mount can now be easily attached to the mounting
holes on the rear of the TV. These
holes are indicated in the picture
below.
For optimum viewing, if wall
mounting the TV higher than
eye level, the TV should be tilted
downwards so that the TV’s screen is
‘face on’. See fi g 1 and 2
Attaching / Detaching the Stand
Important - If you mount this television on the wall, use only the screws holes for wall mounting. Using other screws can cause
irreparable damage to internal components.
fi g 1
fi g 2
TV
TV
Viewing angle
Viewing angle
INCORRECT
CORRECT
Viewing angle
Viewing angle
a
b
c
Manual - Blaupunkt - 32-188G-GB-5B-FTCU-UK and 40-188G-GB-5B-FTCU-UK.indd 8 Manual - Blaupunkt - 32-188G-GB-5B-FTCU-UK and 40-188G-GB-5B-FTCU-UK.indd 8 04-Apr-12 11:10:13 AM 04-Apr-12 11:10:13 AM