Blaupunkt 32/136O-WB-11B-EGDP User Manual Download Page 27

30

FREQUENTLY ASKED QUESTIONS

General Information

General

I would like to have louder 
sound by connecting additional 
speakers. For TV models with 
digital optical audio output.

Option 1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available 
separately) to connect to an amplifi er/surround sound system. Please note this will 
deactivate the TV’s built in speakers.
Option 2) Connect a digital optical audio cable from the TV’s digital optical audio output to 
your amplifi er/surround systems digital optical audio input.

General

Why are some options in the 
menu unavailable and greyed 
out.

Some options are only available in certain sources, i.e. HDMI. They are unavailable in the 
other sources where they have no eff ect.

General

Can I stop my TV automatically 
turning off  after 4hrs? 

Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select OFF.

TV

I have tuned in Digital TV but I 
am not receiving any or all of the 
channels and/or the channels I 
receive are breaking up.

1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or 
www.saorview.ie
2) Check you are using an aerial that is able to receive a good digital signal. In most cases, 
you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent 
digital coverage, you may be able to use a loft type aerial but it is highly likely that you will 
also need to connect a booster between the back of the TV and the TV aerial wall socket. 
Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/
indoor type aerial.

TV

I have re-tuned my television 
but when I switch it off  it is not 
storing the channels.

If the TV does not save the channels when you power it off , it’s likely the channel database 
has become corrupt. 

1)

 Turn off  the TV.

2)

 Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again. 

3)

 Using the remote control, press Menu followed by 8-8-8-8 to enter the initial setup/fi rst 

time installation menu. 

4)

 Press OK (let the TV run the full tuning process).

5)

 Once completed, turn off  the TV, reconnect the RF/Aerial cable then turn the TV back 

on again. 

6)

 Repeat steps 3 & 4.

VCR/DVD
Recorder

I have connected the TV to my 
VCR or DVD Recorder via SCART 
but it is not recording.

In addition to connecting via SCART, you should connect the aerial cable from the wall 
socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to 
the TV.

Game Consoles

I have connected my 
Playstation/Xbox to the TV via 
HDMI, but I am not receiving 
any pictures or sound on my 
Television.

1) Ensure the TV is set to on the correct HDMI source.
2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox 
instruction manual.

Game Consoles

I have connected my 
Playstation/Xbox to the TV via 
Component cables (red, green 
& blue) but I am not receiving 
any sound.

Component cables only provide HD pictures. For the sound you will need to connect the red 
& white audio cables on the Playstation/Xbox to the red & white phono inputs (or mini AV 
input where fi tted) on the rear of the TV. Please refer to the ‘Connections’ pages.

System Lock

I have changed the password
on the television and now
forgotten it.

There is a master password of 4711, to gain access to the TV menu and reset the 
normal password.

USB Mode

I have inserted a USB Memory 
Key, but the TV does not 
recognise it.

Ensure the USB Memory Key is formatted to type FAT32.

USB Mode

Using a USB portable hard drive 
larger than 32GB.

If you wish to use a portable hard drive larger than 32GB, please note that it must be 
formatted to the FAT32 fi le system in order to operate on this TV. Windows XP/Vista 
computers are only capable of formatting up to 32GB, therefore, you will need a software 
programme/utility to format larger hard drives. 
Please refer to the website, www.umc-uk.co.uk, for more information.

User Guide - Blaupunkt - 32-136O-WB-11B-EGDU-UK - BLA-MAN-0344.indd   Sec1:30

User Guide - Blaupunkt - 32-136O-WB-11B-EGDU-UK - BLA-MAN-0344.indd   Sec1:30

16/12/2016   11:29:05

16/12/2016   11:29:05

Summary of Contents for 32/136O-WB-11B-EGDP
































Reviews: