MONITOR INSTALLATION
CONNECTION DIAGRAM
PAL/NTSC Switch
Brightness Adjustment
For TV system, it have PAL,
NTSC, or auto, you can
choose the suitable system
Trigger wire
Monitor RVM 7.1
Monitor RVM 5.1
12 - 24V
GND
RED (TO ACC +12V)
BLACK (TO GROUND)
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid
mode and light mode, press the seventh button on the monitor, you can adjust
the brightness according you need
IMPORTANT NOTES
1.The rear(front) view camera functions technically as a driver assistance
device, which cannot be taken as substitute for driver
’
s responsibility
when operating the vehicle.
2.To keep the camera working properly, please clean the camera regularly
to free it from dirt, water drops, snowdrops,etc.
3.Although the camera is designed to be waterproof, please do NOT use
high-pressure water jet to wash the camera as this may break the glass
lens.
4.Keep the cables of the camera away from high temperature objects such
as engine or exhaust.
5.If the camera model you have comes without in-built LED lights, please
turn on your license plate light for better vision at night or in dark areas.
6.The camera are applicable to vehicles with DC 12V power output(10%
higher or lower allowed), please do NOT use it on vehicles with DC 24V
or other power output out of this range, otherwise it is very likely to get
burned.
7.The specifications of the camera are subject to change without prior
notice.
5
CONNECTION DIAGRAM
GND
Trigger wire
12 - 24V
Brightness Adjustment
PAL/NTSC Switch
PAL
NTSC
For TV system, it have PAL, NTSC,or auto, you can choose the suitable system
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid mode and light
mode, press the seventh button on the monitor, you can adjust the brightness according you need
Monitor
Before operating the monitor, please read this manual thoroughly
and retain it for future reference.
1
Ver 1.0
USER MANUAL
DIGITAL LCD MONITOR
Monitor
V1
V2
Fuse
RED(TO ACC +12V)
BLACK(TO GROUND)
IMPORTANT NOTES
1.The rear(front) view camera functions technically as a driver assistance
device, which cannot be taken as substitute for driver
’
s responsibility
when operating the vehicle.
2.To keep the camera working properly, please clean the camera regularly
to free it from dirt, water drops, snowdrops,etc.
3.Although the camera is designed to be waterproof, please do NOT use
high-pressure water jet to wash the camera as this may break the glass
lens.
4.Keep the cables of the camera away from high temperature objects such
as engine or exhaust.
5.If the camera model you have comes without in-built LED lights, please
turn on your license plate light for better vision at night or in dark areas.
6.The camera are applicable to vehicles with DC 12V power output(10%
higher or lower allowed), please do NOT use it on vehicles with DC 24V
or other power output out of this range, otherwise it is very likely to get
burned.
7.The specifications of the camera are subject to change without prior
notice.
5
CONNECTION DIAGRAM
GND
Trigger wire
12 - 24V
Brightness Adjustment
PAL/NTSC Switch
PAL
NTSC
For TV system, it have PAL, NTSC,or auto, you can choose the suitable system
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid mode and light
mode, press the seventh button on the monitor, you can adjust the brightness according you need
Monitor
Before operating the monitor, please read this manual thoroughly
and retain it for future reference.
1
Ver 1.0
USER MANUAL
DIGITAL LCD MONITOR
Monitor
V1
V2
Fuse
RED(TO ACC +12V)
BLACK(TO GROUND)
IMPORTANT NOTES
1.The rear(front) view camera functions technically as a driver assistance
device, which cannot be taken as substitute for driver
’
s responsibility
when operating the vehicle.
2.To keep the camera working properly, please clean the camera regularly
to free it from dirt, water drops, snowdrops,etc.
3.Although the camera is designed to be waterproof, please do NOT use
high-pressure water jet to wash the camera as this may break the glass
lens.
4.Keep the cables of the camera away from high temperature objects such
as engine or exhaust.
5.If the camera model you have comes without in-built LED lights, please
turn on your license plate light for better vision at night or in dark areas.
6.The camera are applicable to vehicles with DC 12V power output(10%
higher or lower allowed), please do NOT use it on vehicles with DC 24V
or other power output out of this range, otherwise it is very likely to get
burned.
7.The specifications of the camera are subject to change without prior
notice.
5
CONNECTION DIAGRAM
GND
Trigger wire
12 - 24V
Brightness Adjustment
PAL/NTSC Switch
PAL
NTSC
For TV system, it have PAL, NTSC,or auto, you can choose the suitable system
For the brightness, it have 5 modes, it have standard mode, soft mode, vivid mode and light
mode, press the seventh button on the monitor, you can adjust the brightness according you need
Monitor
Before operating the monitor, please read this manual thoroughly
and retain it for future reference.
1
Ver 1.0
USER MANUAL
DIGITAL LCD MONITOR
Monitor
V1
V2
Fuse
RED(TO ACC +12V)
BLACK(TO GROUND)
Fuse
