www.blaubergventilatoren.de
Freshbox 100
8
2 holes Ø 130 mm (5
1
/
8
") hole for Ø 100 mm (3
15
/
16
")
Fill the gaps between the wall and
the air ducts with a mounting foam
4 holes (Ø 8 (
5
/
16
")
and 90 mm (3 9/16") deep)
in the wall made using
a mounting template
Power cable entry
Power cable entry
2 holes Ø 130 mm (5 1/8") hole for Ø 100 mm (3 15/16")
Fill the gaps between the wall and
the air ducts with a mounting foam
4 holes (Ø 8 (5/16")
and 90 mm (3 9/16") deep)
in the wall made using
a mounting template
416.5 mm
16
3/
8"
647 mm 25
1/2
"
205 mm
8
1/16
"
162 mm
6
3/
8"
468.5 mm
18
7/
16"
102.5 mm
4
1/16
"
76 mm
3"
400 mm
15 3/4"
73.5 mm
2 7/8"
547 mm
21 9/16"
91 mm
3 9/16"
230 mm
9 1/16"
170 mm
6 11/16"
188.5 mm
7 7/16"
158.5 mm
6 1/4"
77 mm
3"
ADDITIONAL HOLE!
DRILL UPON CUSTOMER’S REQUEST ONLY!
Ø 130 mm (5 1/8") hole for Ø 100 mm (3 15/16") air ductFill the
gaps between the wall and
the air ducts with a mounting foam
ADDITIONAL HOLE!
DRILL UPON CUSTOMER’S REQUEST ONLY!
Ø 130 mm (5
1
/
8
") hole for Ø 100 mm (3
15
/
16
") air duct
Fill the gaps between the wall and the air ducts with a
mounting foam
Mounting template
THE UNIT MUST BE MOUNTED ON A PLANE SURFACE.
MOUNTING OF THE UNIT TO AN UNEVEN SURFACE CAN LEAD TO THE UNIT CASING
DISTORTION AND OPERATION DISTURBANCE.
BEFORE MOUNTING MAKE SURE THE CASING DOES NOT CONTAIN ANY FOREIGN
OBJECTS (E.G. FOIL, PAPER).
1. Mark and drill holes in the wall using a mounting
template.
Fix the mounting template on the wall with a self-
adhesive tape at the required level.
Using a mounting template make marks to drill holes
for air ducts, for unit mounting and for power cable
entry.
Before installation operations route necessary cables
and wires to the unit mounting place.
Unit mounting
