www.blaubergventilatoren.de
Freshbox 100 WiFi
11
CONNECTION TO POWER MAINS
POWER OFF THE POWER SUPPLY PRIOR TO ANY OPERATIONS WITH THE UNIT.
THE UNIT MUST BE CONNECTED TO POWER SUPPLY BY A QUALIFIED ELECTRICIAN.
THE RATED ELECTRICAL PARAMETERS OF THE UNIT ARE GIVEN ON THE
MANUFACTURER’S LABEL.
The unit is rated for connection to power mains 1~110-240 V / 50 (60) Hz according to the wiring diagram.
The connection must be made using durable, insulated and heat-resistant conductors (cables, wires).
The actual wire cross section selection must be based on the maximum load current, maximum conductor temperature depending in
the wire type, insulation, length and installation method. The external power input must be equipped with an automatic circuit breaker
QF
built into the stationary wiring to open the circuit in the event of overload or short-circuit.
The position of the external automatic circuit breaker must ensure free access for quick power-off of the unit.
The trip current of the automatic circuit breaker must exceed the maximum current consumption of the unit (refer to the “Technical data”
section). The recommended trip current of the circuit breaker is the next current in the standard trip current row following the maximum
current of the connected unit.
The automatic circuit breaker is not included in the delivery set and can be ordered separately.
3
4
PE
LA
5 6
PK PK
7 8
H H
9 10
YN YL
1
L
2
N
L
N PE
QF
11 12
PH RH
13
L1
14 15
N1 PE1
3
4
5 6 7 8 9 10
1
2
L
N PE
QF
13
Power
cord
plug
PK to fire alarm
panel
(remove the jumper)
NO-External device contact
(humidity sensor)
Heating element for
condensate warming