background image

www.blaubergventilatoren.de

SHM 100 DK

7

READ THE USER'S MANUAL BEFORE INSTALLING THE UNIT.

BEFORE INSTALLING ADDITIONAL EXTERNAL DEVICES,  

READ THE RELEVANT USER MANUALS.

DO NOT BLOCK THE AIR DUCT OF THE INSTALLED VENTILATOR WITH DUST 

ACCUMULATING MATERIALS, SUCH AS CURTAINS, CLOTH SHUTTERS, ETC. 

AS IT PREVENTS AIR CIRCULATION IN THE ROOM.

To install an external ventilation hood or grille, it is necessary to have access to the external surface of the wall at the place of 

installation.

1. Prepare a round core hole in the outer wall.
The diameter of the hole depends on the specific model of the ventilator and is indicated in the table of overall dimensions in the 
«Technical data» section.

Ø D1

min 300

min 300

min 300

A

A

A-A

 

2. Install the telescopic air duct in the hole in such a way that its sections coincide with the outer and inner surface of the wall. For ease 
of installation, use mounting wedges.
Install the air duct with the minimum slope of 3 mm downwards from the outer wall side.

Fill the gaps between the wall 

and the hole with a 

mounting foam.

Foam wedge

min 3 mm

3. Install the outdoor grille, connecting the power from the solar battery to the fan.

MOUNTING AND SET-UP

Summary of Contents for SHM 100 DK













Reviews: