EN
23
SAFETY REQUIREMENTS
The fans belong to devices of the Class A insulation by type of protection
against electric-shock hazard.
Level of protection against access to hazardous parts and water
ingress protection is IP24.
Before connection of the fan to network, you should be convinced of
absence of visible damages of the impeller, case, cover, and that there
are no foreign objects left in flowing part of the case which can damage
impeller.
The fan connection should be carried out by the expert electrician who
has the admission to the works and has studied this manual.
The fan service and repair should be made only after its disconnection
from the network system.
Operation of fans outside of the temperature range,
as well as in premises with aggressive impurities in air
and in explosive environment.
You should take measures for prevention against ingress of
blackdamp in a room through open flues or other fire-prevention
installations.
A possibility of return gas flow from the devices using gas or open
flame should be excluded.
FORBIDDEN
INSTALLATION AND PREPARATION FOR WORK
All works on installation and connection of the fans
should be carried out only by the removed network
system voltage.
Connection of the fans to network system should be
carried out through the switch embedded in the fixed
wiring, with contact gaps at least 3 mm on all poles.
The direction of air injection should coincide with the arrow direction on
the fan case.
The scheme of the fan connection is shown on fig. 5.
Installation variants are shown on fig. 6, 7 and 8.
ATTENTION
Summary of Contents for Brise 100
