Blau Aquaris c Mul -Dosing Pump
The Blau Aquaris c Mul -dosing Pump is a three peristal c dosing pumps System expandable up to eleven (4 pumps
more for each expansion module), which allows administer automa cally liquids in doses from 1 to 99ml.
Before the installa on and use of this pump, we recommend to read and understand these instruc ons.
Features:
-
Clock and memory in case of power cut
-
Calibra on func on
-
Weekly programming
-
Alarm func on in case of motor breakdown or lack of liquid in the container
Package content:
-
Central unit with programmable controller and 3 peristal c dosing pumps.
-
3 plas c connectors and 3 check valves
-
Power source, 12V power adapter
-
Transparent tube
-
Measuring cylinder for calibra on
Descrip i n:
t o
Programming instruc ons
Time se ng
Enter the actual day and hour: press the bu on “ me” and the day will blink, press “+” or “-“ for select the correct
day. Then press the arrow for select hour, minutes or seconds. Through bu ons “+” and “-“” adjust the hour. When
the suitable hour is set, press “ me” for two seconds, and the hour will be fixed.
Calibra on
Press “Cal” bu on for entry in calibra on mode. |01 50 10| will be showed in the screen. The pump 1 will start
dose. Use the calibra on cylinder for measure if it's exactly 10ml. If the dose is lower, press “+” and repeat the
measurement. Undertake this opera on un l obtain the expected result. If the measure is upper than 10ml, you
can correct it with “-“ bu on. Press “pump” bu on to pass to the second pump and perform the same opera on.
Finally press “Cal” for see the calibra on menu.
Pump programming
Select the pump to programme pressing bu on “pump”. When a pump is selected, the central two digits will
blink, the pump number is on the top le of the screen. The first number blinking is the dosing star ng me,
which can be modifiable between 00 and 23.
The next value to select is the number of doses (two digit number in the top right in the screen). Choose the
value with “+” and “-“. Then the value will be included to the total value of the daily dose, which is in the bo om
of the screen.
The next screen shows numbers from 1 to 7, that means the days of the week. Select the value 0 in the place of
the days without dosing.
Finally is possible to determine the volume of liquid in the container which feeds each pump. When the dosing
volume will be bigger that the dosing volume in the container, the System will ac vate a warning buzz for fill it.
Manual opera on
Press bu on “P” for switch on the screen in manual mode. Press “P” for prime the pump or select manual mode.
Select pump with bu on “pump”. Press twice the “P” bu on for exit this mode.
Note: the System mer Works without electric current.
If two pumps have to dose at same me, the second one will have a me delay of 2 minutes.
If a motor is broken, the screen will show its number and will buzz un l it will be repaired.
Warning
1. The system will work with the adequate liquids, avoid the thick liquids, liquids that can precipitate or
extremely corrosive substances.
2. Regularly check the tubes and replace them if they show signs of deteriora on.
3. Avoid the pump from opera ng with high levels of humidity.
4. Don't submerge the pump in the water, avoid water splashes.
RECYCLING
Do not throw this dosing pump into rubbish bins, it must be placed in a waste treatment plant..
W
Y
ARANT
This product has a warranty of 2 years for any manufacturing defect.
The warranty does not cover:
-Product failures caused by a wrong use.
-Product failures caused by a wrong installa on.
-Product failures due to a con nuous opera on.
- ransport costs to the repair centre.
T
For use the warranty, it is necessary accompany the product with his purchasing receipt.
aquaristic
aquaristic
A
B
DC12V
Back of the unit
A,B: 12 connectors for
RJ
auxiliary units
Select an adjustable pump/ le cursor
Pump calibra on/adds 1 unit
Time mode selector/substracts 1 unit
Manual opera on of a pump/right cursor
TIME MON
1 8 : 4 5 : 5 0
aquaristic
