938439PK3/1-0321
7
5
Battery Charging
Read the user instructions supplied with the charger before using for the first time.
We recommend the device is charged daily; it should take 5.5 hours to charge fully, depending
on residual charge. An exhausted or flat battery may take longer.
Please familiarize yourself with the charging information in this section.
The batteries are not field replaceable and will be replaced as necessary when serviced.
Reset
The device will take several seconds to reset when the charger is disconnected and a single
blue flash from the Status Indicator LED on the left hand side of the device will confirm a correct
startup.
LED
Charging state
Single Flash Repeated
Charging - Battery Empty
Double Flash Repeated
Charging - Charge Level Medium
Triple Flash Repeated
Charging - Charge Level High
Steady ON/Steady OFF
Charging Completed
Rapid Flashing
High Temperature Shut Down
*
*Charging continues when normal charging temperature is reached. (See Section 4.)
Followed By
Setting Up
Lay the limb on a flat surface and connect the inductive charger pod to the charging surface on
the back of the device.
Use the Charging Indicator LED on the right hand side of the device to confirm that charging has
initiated correctly:
Charging
One initial flash x1 — Connection Established
Do not allow anything (e.g. stocking, clothing) to intrude in between the charging
surface and the charger pod while charging is in progress. This will result in decreased
charging performance and buildup of heat.
Charging
Indicator
LED
Charger
Pod
Summary of Contents for ElanIC
Page 67: ...938439PK3 1 0321 67 ...
