16
5.3
Controlling tool angle cylinder
The tool angle cylinder is controlled by left inner handle.
Push the handle to angle the tool downwards and pull the handle to angle the tool upwards to the proper
cutting angle.
Continuing to push the handle will jack up the front of the machine. This will need to be done when doing
maintenance on the machine. When doing the machine maintenance, place blocks under the machine.
Never use the cutting head only.
3)
Left inner handle
4)
Hydraulic cylinder
5)
Debris deflector
6)
Blade holder
–
set
Summary of Contents for BMS-220 ADB
Page 11: ...11...
