13
Hydraulic System Instruction
To check the oil level there is an indicator (1) installed on the side of the tank. The indicator can be seen from the
driver side of the BMR-25P under the seat behind the side panel.
The level shouldn’t be lower than
half the range
of the indicator.
At least one time during the year or every 150 hours the oil from system and filter should be replaced. For this
operation disconnect the battery. The oil drain hose comes out under the machine near back. You can refill the
hydraulic oil from the driver side panel. The oil filter is located on the side of the hydraulic oil tank. Before doing
any maintenance, disconnect the power and block machine in stable position.
1
