Blastrac BMG-444, Operating Instructions Manual

Page: 19 / 34

19
5. Operating
During operating the BMG-444, the following additional safety instructions must be followed closely.
5.1 Switch on the machine

Connect the dust hose to the machine and turn on the dust collector before switching on the machine.

Connect the power supply to the machine (1).

Stand behind the machine and hold the handle(2) tight.
Push down the handle of the machine (2) so that the Grinding heads are off the ground.

To start the machine, push the green button on the electrical box.

Check the direction of rotation of the 400 volt version. The machine must turn counter clockwise. (the
fan of the motor is turning clockwise if the motor turns counter clockwise).

Let down the machine till the diamond wings hit the floor.

Start grinding.
5.2 Switch off the machine

Push the red button on the electrical box.

Wait until the machine stops rotating before laying down the machine on the metal support.

Pull out the power supply.

Shut down the dust collector.
Start and Stop Buttons