Blastrac BDC-22, Operating Manual

Page: 20 / 99

www.blastrac.com ‒ custserv@blastrac.com
Operating manual BDC- 2 2 17/17
GB
Troubleshooting
Problem Cause Remedy
The vacuum cleaner does not
start
Lack of power supply
Check for power at the socket.
Check the condition of the socket and the
cable.
Ask for assistance to be performed by a
qualified manufacturer’s technician.
Exhausted or broken brushes
Replace.
The vacuum cleaner revolutions
increase
Clogged primary filter
Use the filter shaker (models with manual filter
shaker). Replace it if this is not sufficient.
Absolute filter clogged Replace.
Clogged vacuum hose Check the vacuum hose and clean it.
Dust leaks from the vacuum
cleaner
The filter is torn Replace it with another of identical type.
Inadequate filter
Replace it with another of a suitable category
and check.
Noisy motors
Motor brushes (carbon) worn or
broken
Remove and replace the (carbon) motor
brushes.
Electrostatic current on the
vacuum cleaner
Missing or inefficient grounding
Check all ground connections. In particular on
the vacuum inlet fitting; replace the hose with
an antistatic hose.