5
STR 821
Part N
o
: 9085.01
SAT-AUDIO Transmodulator
2 x DVB-S (QPSK)
→
6 x FM
B
LINE
FM-Channel
displays the adjustments of the FM output channel (1..6)
Channel name
programme name of the respective FM channel, editable (max 25 characters)
Program settings
Program listing
loading of the list with available programmes with pre-selection: all programmes or only radio-
programmes (see menu 2)
Input channel
selection: 1/ 2
Audio PID
Audio PID of the programme, adjustment range: 0 … 16383
FM-Output
RF-Signal
selection: On/ Off
Output frequency
adjustment range: 87500 ... 108000 kHz
RF Level correction
adjustment range: +3 …-3 dB in 0.5-dB steps (per channel)
Output attenuation
adjustment range: 0 … 31 dB in 1-dB steps (module)
RF-Output mode
selection: loop/ only output
Audio settings
Audio mode
selection: Mono/ Mono1/ Mono2/ Stereo/ Auto
Audio gain
adjustment range: +6 ... -10 dB in 0.5-dB steps
RDS-Settings
Data source/ mode
selection: RDS-PID/ Audio-PID/ Static/ Off
RDS-PID
adjustment range: 0 … 16383
Routing to the adjustment menu: configuration static RDS (see menu 6)
Operating status
selection: On/ Off/ reset
SNMP-Trap messages
selection: On/ Off, if SNMP option in HCB x00 enabled, otherwise „locked“ displays
Factory settings
setting the default values (see menu 4)
Routing to the respective adjustment menus:
Extended settings
see menu 3
Status
see menu 7
Software versions
see menu 8
8.2 Load programme list (menu 2)
In this menu, all of the input stream
contained services are listed. Depen-
ding on the preselection only radio-
services or all services appear. For
every of the 6 FM channels a service
can be choosen. The assumption/
settings of the services occurs by
pressing the “Transmit” button.