IGS-900 16 DVB Tuner to IP-Out
Author: Ralf Riedel
April 15, 2018
Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2018-03RR
Page 11
Tuner-Setup:
Using a Multiswitch with more than one SAT-position and > 16 outputs: You can set every
single Tuner Input individually.
Using a SAT-Splitter: Be carefull,
active
splitter needs at least one 13V…18V DC connection
to it to operate. You should avoid to switch on V/H polarisation Voltage 13/18V on every
Input port. The active splitter would pass the 13V or 18V to the Multiswitch and assigning
the fixed polarisation to the Multiswitch. So all selected Transponders should be either in
Vertical (13V) or Horizontal (18V) position.
Passive
splitters should be used with DC Passthrough and the Voltage should be passed
only once as well.
We recommend to check
www.lyngsat.com
or
www.satbeams.org
for correct settings.
Example:
https://www.lyngsat.com/Astra-1KR-1L-1M-1N.html
