BLANKOM HDE-(4)264B/265B User Manual
Version 1.1 – 02-2019
Page - 21 -
techn. data are subject to change w/o notice!
UNICAST
ca be streamed as Point to Point by HTTP or RTSP (RTMP as well but that’s a topic for later in
this manual):
If you chose http, and apply,
the stream address will be shown in the status page:
A RTSP password can be enabled for the output stream like
So the encoder asks the VLC user to insert username/password
which are the same like you have setup in:
TS ID can be inserted.
PMT (Program Map Table) start PID for the VIDEO-
PID/Audio PID etc… can be setup. Every stream or
Service will get an increased PID-number.
Service name can be changed to your needs as well
as the service provider name you choose. TS-empty
packets will insert the zero-stuffing PID 8191hex to
fill the stream with multiples of zero-packets on top
of your data rate for the (DVB) stream which is
usually a variable bitrate stream.
