7
8-fold IP-/ ASI-TV Modulator
IP/ SFP/ ASI (H.264/ AVC, MPEG2)
→
4x CI
→
ATV (8x AM)
A-PALIOS-IPM4CI
Part N
o
: 5113.81 / 5113.83
8.2 Setting of individual parameters
Here you can set certain parameters of the device or perform configurations. The various setting menus can be selected in the navigation
tree on the left side. The setting is supported by an online help. If you mouse over a parameter explanations of this parameter are
displayed in an orange colored text box in the lower part of the screen. By setting in the “Setup“ menu ( »chapter 8.2.8) can be selected
so that the help is displayed in the status bar of your browser. If appropriate setting changes in the browser options are necessary.
By default status information for the device are displayed below the navigation tree. An option to move it on the right side instead is
available ( »chapter 8.2.8).
All eight channels are listed individually. A green LED symbol in front of “
channel 1 ... 8
“ means that input and output are synchronized
and that the channel operates without error. An orange colored symbol indicates that an error has occurred in that channel. An overview
of the status of various parameters of the channel is obtained by clicking the corresponding channel. A transparent LED symbol means
that the channel is not configured or the RF output is turned off.
If you
click on the channels
an overview window is displayed. The pop-up window closes after 20 seconds or by cklicking in its lower
part.
The „Power“ LED indicates the connection status between the network interface and the device. The „System“ LED gives an overview
over the status of system parameters of the device.
In all menus it‘s possible to switch the language between German and English on the top of the right side.
