OPERATING INSTRUCTIONS
The crown has two distinct positions:
Position A,
crown in manual-winding position.
Position B,
crown pulled out to time-setting position, enabling adjustment of the hours
and minutes.
Push the crown back in to position A once the time has been set.
Fast calendar adjustments:
Under-lug correctors can be accessed by opening the hunter with the opening piece
located at 4 o'clock. Correctors 1,2,3 and 4, located under the case lugs, serve to adjust the
complete calendar and can be actuated with a finger.
1) To adjust the date: corrector 3, located at 7 o’clock
2) To adjust the day: corrector 4, located at 11 o’clock
3) To adjust the month: corrector 1, located at 1 o’clock
4) To adjust the moon phases: place the disc in the full-moon position using corrector
2 located at 5 o’clock. Check the date of the last full moon using a lunar calendar.
Press corrector 2 the same number of times as the days that have elapsed since the
last full moon.
Please make sure to properly close the hunter once the adjustments have been done.
IMPORTANT
Corrections of the date, day, month and moon phase may be performed at any time
of the day or night without any risk of damaging the mechanism. Nonetheless, when
the moon is changing position – between 5 and 7.30 pm– the moon-phase indicator will
only jump the current phase. To move the disc several moon phases forward, such an
adjustment must be performed outside of this time-frame. During the change of date and
day – between 8 pm and 0.30 am– the date and day indicators will only jump the current
date and day. To move several dates or days forward, the adjustment must be performed
outside this time-frame.
Summary of Contents for 6654
Page 1: ......
Page 2: ...Your watch 47 ...
