Blanco BOSE 625X, Manual To Installation, Page: 33 / 45

32
7
EN
If you have a doubt about the correct functioning of your oven, this does not
necessarily mean that there is a malfunction. In any event, check the following points:
YOU OBSERVE
THAT…
P O S SIB LE
C AU SE S
WHAT SHOULD YOU DO?
The oven is not heating.
- The oven is not connected
to the power supply.
- Your fuse is not working.
- The selected temperature is
too low.
➡
Plug in your oven.
➡
Replace the fuse in your electrical
set-up and check its capacity (16A).
➡
Increase the selected temperature.
The padlock is flashing.
- P roblem with the door’s
locking mechanism.
➡
Call the After-Sales Service De-
partment.
The oven light is not
working.
- The light is not working.
- The oven is not connected
or the fuse is not working.
➡
Change the bulb.
➡
Plug in your oven or change the
fuse.
The pyrolysis cleaning
cycle does not begin.
- T he door is not properly
closed.
- T he locking system is
defective.
➡
Verify that the door is locked.
➡
Call the After-Sales Service De-
partment.
Your oven is beeping.
- During cooking.
- At the end of a cooking cycle.
➡
The temperature recommended
for your choice has been reached.
➡
Your programmed cooking cycle
is finished.
The cooling fan
continues to operate
after the oven stops.
- The fan should work for up
to an hour after cooking, or
when the oven temperature is
greater than 125°C.
- If it does not stop after 1 hour.
➡
Call the After-Sales Service De-
partment.
Warning
- Repairs to your appliance should only be performed by professionals. Non-standard
repairs may be a source of danger for the user.
Tip
In all circumstances, if your efforts are not sufficient, contact the After-Sales Service
Department without delay.