Blanco BIC603T, Instructions Manual

Page: 15 / 20

- The Booster can be activated simultaneously on all the enabled zones.
- The
Booster
function will be active for about 5 minutes, after which cooking will continue at level
9
.
- In order to stop this function, select the concerned cooking zone and the “ - ” key until you reach the desired
level.
- All operations will be combined with a “BEEP” acoustic signal.
- The
Booster
might not turn on if the cooking zone (indicated by the letter (
Z
)) was activated previously with
high temperature levels.
• Integrated power control (Fig.5):
Each phase (this is divided into two zones in a vertical line:
F1
e
F2
) is capable of using a maximum power of
3,700W.
If this is exceeded for example by activating the Booster, the software automatically lowers power of the previously
selected zone until it reaches the allowed power level.
The display of the zone with limited power will begin to flash for about 3 seconds. During this time it is possible
to modify the power level.
• Maintenance (Fig.8):
Remove any residues of food and drops of grease from the cooking surface using the special scraper supplied
on request.
Clean the heated area as thoroughly as possible using SIDOL, STAHLFIX or similar products and a cloth/paper,
then rinse with water and dry with a clean cloth.
Using the special scraper (optional) immediately remove any fragments of aluminium and plastic material that
have unintentionally melted on the heated cooking area or residues of sugar or food with a high sugar content.
In this way, any damage to the cooktop surface is prevented.
Under no circumstances use abrasive sponges or irritating chemical detergents such as oven sprays or stain
removers.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED BY BREACHING
THE ABOVE WARNINGS.
- 15 -