Blanco BFD914WX Instruction Manual Download Page 2 | Manualshive

Page: 2 / 20

Blanco BFD914WX Instruction Manual Download Page 2

Dear Customer,

Thank you for buying a BLANCO freestanding oven.

Before we continue telling you about this appliance, we cordially invite you to become part of the
Blanco family by subscribing online. Please visit our website where you can easily register for
product/cooking demonstrations, and request Blanco’s gourmet recipes. Go to

www.blanco-

australia.com

and fill in the subscription details in the contact us/showrooms section.

You will find that the clean lines and modern look of your Blanco appliance blends in perfectly with
your kitchen décor. It is easy to use and performs to a high standard.
Blanco also makes a range of products that will enhance your kitchen such as cooktops, range
hoods, dishwashers, microwaves, sinks and taps. There are models to complement your new
Blanco Oven.
Of course, we make every effort to ensure that our products meet all your requirements, and our
Customer Relations department is at your disposal, to answer all your questions and to listen to
all your suggestions.
Please complete the warranty card and keep your receipt as proof of purchase. Retain all
documents relating to the purchase of this product
Blanco is committed to providing increasingly efficient products that are easy to use.

READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE

APPLIANCE.

It is important that you retain these instructions, proof of purchase as well as other important documents
about this product for future reference.
The manufacturer will not be responsible for any damage to property or to persons caused by incorrect
installation or improper use of the appliance.

Due to continual product development, Blanco reserves the right to alter specifications and appearances without
notice.

THIS APPLIANCE HAS BEEN DESIGNED FOR DOMESTIC USE ONLY

TO BE INSTALLED BY AN AUTHORISED PERSON

CONTENTS

SECTION

Page #

WARNINGS

2

LOCAL AUTHORITY REQUIREMENTS

3

IMPORTANT INFORMATION FOR INSTALLING THE APPLIANCE

4

APPLIANCE GAS CONNECTION

5

SUPPORT LEGS

7

CONVERTION TO A DIFFERENT TYPE OF GAS

9

APPLIANCE ELECTRIC CONNECTION

10

APPLIANCE USE AND MAINTENANCE

11

TROUBLESHOOTING

18

DISPOSAL INFORMATION

18

1

«
1
2
3
4
...
»

Summary of Contents for BFD914WX





















Reviews:

No comments