18
Maintenance and Cleaning
Cleaning And Maintenance of the Oven’s Front Door Glass
Remove the profile by pressing the plastic latches on both left and right sides as shown in figure 20
and pulling the profile towards yourself as shown in figure 21. Then remove the inner-glass as
shown in figure 22. If required, the middle glass can be removed in the same way. After cleaning
and maintenance is done, remount the glass and the profile in reverse order. Make sure the profile
is properly seated in its place.
Figure 20
Figure 21
Figure 22
Rack Positions
It is important to place the wire rack into the oven properly. Do not allow wire rack to touch the rear
wall of the oven. Rack positions are shown in the above image. You may place a deep tray or a
standard tray in the lower and upper wire racks.
Installing and removing wire racks
To remove the wire racks, press the clips and first remove the lower and then the upper side from
the mount. Reverse the procedure to replace the wire racks.
