Blanco BDW4510X Instruction Manual Download Page 31

 

30

 

 

     

 

 

 

 

   

Program Follow-up

You can follow the progress by the help of the program follow-up symbols on

the display.( 22 - a,b,c,d).

   

 

  

As the washing proceeds, respectively Washing and Drying symbols will be illuminated.

When the drying symbol is on, the machine remains silent for about 40-50 minutes.

Do not open the door before the completion indicator light is on. When the programme

ends, Completion indicator light is illuminated.

When the program you have selected starts, you may see the estimated remaining

time in the time indicator.

NOTE:

 A few minutes after the program finishes and the Completion lamp is illuminated,

you may open the door slightly and leave it ajar in order for the drying process to be 

faster. 

NOTE:

If the machine door is opened or a power failure occurs during washing, the 

machine will proceed from where it stopped after the door is closed or power is restored. 

NOTE:

If a power cut occurs or if the door is opened during drying, the programme ends.

The machine will be ready for selecting a new programme.

NOTE:

The total time 

of the programme depends on the room temperature, mains

water temperature

 and amount of dishes. 

   

Summary of Contents for BDW4510X












































Reviews: