5
SAFETY WARNINGS
WARNING FOR USE:
Do not touch the appliance with wet or damp hands or feet.
Do not use the appliance barefoot.
The manufacturer will not be liable for any damage resulting from improper, incorrect
or unreasonable use .
During, and immediately after operation, some parts of the
appliance
are very hot:
avoid
touching them.
Do Not leave heating elements on when not in use .
If
the ceramic glass is not cleaned immediately, there is a risk of residues becoming
encrusted and they will be impossible to remove after the glass has cooled .
Before cooking for the first time, it is necessary to clean the
glass
as follows: switch on the
front heating elements to the maximum for at least 30 minutes, heating pans full of water.
After 30 minutes, switch off the front heating elements and switch on the rear heating
elements plus the central heating element, where possible, to the maximum. This is
necessary to eliminate the
"new smell" and to allow any humidity which may have formed
during the production process to evaporate. This is necessary for the correct operation of
the electronic circuits and the control panel. If the controls do not work properly when
the 30 minutes are up, there is still some humidity inside, leave the heating elements on
until all the humidity has completely evaporated, then switch off the
appliance.
Connection to the mains
When cooktop
is first
connected to
a
power supply, a long beep will be hear
d.
All
LEDs
and displays in the Touch Control will be turned ON
for
4 seconds. After an
auto adjust period,
the
cooktop go into standby mode.
ENVIRONMENT PROTECTION
•
The packaging material is ecological and can be recycled.
•
The worn appliances contain certain noble metals. Apply to the local government about
the possibilities of recycling.
•
Don't dispose of your appliance with general household
waste
•
Get in touch with the waste collection centre of your local
council that control the recycling of household appliances.