Blanco 4020684469005, Installation And Care Instructions, Page: 6 / 30

2
Parts list BLANCOTRADON HD
Lever
Cover cylinder
Covering ring + Seal
Cartridge retaining ring
Cartridge
Body
Spout retaining screw
Seals
Inner body
Spout
Flow Stra Seal
Housing for jet control
Base Ring
Stabilisation triangle
Fixing kit
Flexi hose blue + Seal
Flexi hose red + Seal
Technical data
Use
• Pressurised hot water tank and instantaneous
water heater
• Not suitable for low pressure hot water tank/hot
water tank
Operating pressure
• Min. 0.5 bar
• Max. 10.0 bar
Temperature
• Max. 70° C
Note
pressure differences between cold and warm water
connection should be less than 3 bar otherwise the
mixing ratio deviates from the lever position.
Symbols
right wrong recommended
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Installation
Illustrations
Tap hole: 35 mm
- Attach tap
NOTE: don't forget the seal between tap
and supporting surface!
Flush the pipe work to remove foreign debris
from the system. When the tap has been
connected check for leaks,movement and flow
rate/pattern.
Recommendation: fit dirt filter
- Connect flexi hoses
further illustrations on the back fold-out flap
Rinse perlator/ jet regulator
When tap has been fitted check:
tightness, movement, full jet of water
Care
Please note the following advice and the
illustrations on the back fold-out flap.
Illustrations
- Use soft (microfibre) cloth and mild cleaning
agent
- Take care with hard objects
- Cleaning the perlator/ jet regulator with
vinegar
Important
in the event of a query, please enter the 11-digit
Article Number (see wrapper on the cold water hose
of your tap) .
18 19
12
7 11
6
5
2 4
1
16 17
13 15
Installation and care instructions
We have put together the most important product information
to enable you to benefit from the high degree of functionality and the
first class comfort provided by BLANCO taps.
GB
Congratulat
ions on buy
ing
this BLANC
O tap – we h
ope you
are delighte
d with it!
Example