Customise For sPeCiFiC enVironments.
Most people use one everyday program:
• It adapts to all environments.
However, up to four programs can be created and customised with
the IHearYou
®
programmer box and software. Some people like
to keep one program for experimenting.
Some people create extra programs:
• For fluctuating hearing losses.
• For a particular environment that you want to sound different.
Step 6
Special Programs
how to change programs
Hearing aids start up in program 1.
During use push the program button; or tap
upper ear with magnetic wand, then remove
the wand. This opens and closes a switch in
the hearing aid and switches programs.
If you have extra programs, you will hear:
1 beep for program 1
2 beeps for program 2... and so on
Your LOF is usually shipped with the telecoil mode in program 2.
WarninG: Do not place the magnetic wand near computer
equipment or credit cards.
It is safe to store the magnetic wand
inside your hearing aid wallet.
IHearYou
®
is a registered trademark of Blamey & Saunders Hearing Pty Ltd.
Volume dial
When you set up the hearing aid on the computer the volume you
hear is that of the midpoint on the dial.
The volume dial is disabled when the hearing aid is connected
to the computer.
Step 5
Volume
VoLume aDaPts automatiCaLLy.
You can turn the volume up and down manually with the volume
dial, but most people won’t need to.
how to adjust volume
Rolling up the dial increases volume. Rolling down reduces the
volume. There is a beep to indicate when you cross the midpoint.
The volume dial is numbered 1 (softest) to 4 (loudest).
When the volume is below 1, the device clicks ‘off’ (mute).
Louder = roll up
Softer = roll down