PROHDMISP12IR & PROHDMISP14IR
UHD HDMI Splitters with IR Function
0114 223 5000
PD2011-9123-07
HDMI UHD Splitter with HDCP 2.2 offers a solution for splitting a single HDMI input to two or
four HDMI outputs, with the ability to control the source connected from each display
remotely via IR. It provides high performance audio and video output through HDMI cables
up to 4K2K@60Hz (YUV420) resolution and can receive and transmit up to 9Gbps of
bandwidth with minimal data loss.
Kit Contents:
1.
UHD HDMI splitter with IR function.
2.
5V DC power supply.
3.
User manual.
1: IR OUT:
For IR device control.
2: POWER:
Power indicator.
3: IN LED:
Shows the source is connected to the device.
4 & 5: OUT1-2-3 or 4:
LED lights up when the output is connected to an active
TV/display/monitor.
6: EDID STD:
When in 'STD' mode, the unit uses its own built-in EDID settings. In this mode,
the video output will be set to 1080p@60Hz and the audio output at LPCM 2CH Stereo.
EDID TV:
When in 'TV' mode, the unit will read the EDID settings of the device connected to
HDMI OUT 1. If it detects a 4K2K capable EDID setting it will transmit the signal in that
format to all outputs. If no 4K2K capable EDID is detected, then the unit will output the best
resolution that all displays can support.
7 & 8: HDMI OUT 1-2-3 or 4:
Connect HDMI output to a HDMI display for simultaneous HDMI
distribution, or cascade the output to another transmitter to extend the operating distance.
9: HDMI IN:
Connect the input port to the HDMI or DVI output of your source device such as
a DVD player or set-top box with an HDMI cable.
10: DC 5V:
5V DC power supply.
