Set
-
up Guide (24v OUTDOOR CPE)
CPE The Bridge
Backup:
-
Allows you to save the configuration file to your computer.
Restore:
-
Restore the back of the configuration file (also useful for installing many access points with
the same configuration).
Reset Default:
-
Resets the access point back to the manufacturers default settings.
Telnet:
-
Allows access to the devices Telnet port (port 22)
As a security risk we suggest this is turned off unless specifically needed
TIPS
Due to the Browser Cache process on PC please be aware that we advise to refresh any screen before working on settings.
Usually a
is enough.
Chrome: Press the following key combination:
Shift + Ctrl + F5
IE: Press the following key combination:
Ctrl + F5
Safari On PC: Ctrl + F5 or on Apple MAC: CMD + R
Alternatively, use the Chrome browser in
Incognito mode can also reduce browser Cache issues.
https://www.refreshyourcache.com
for further details on the Cache process.
Access point can take up to 2 minutes to reinitialize on reboot.
Using the In
-
Wall AP in
“
AP Mode
”
will require you to set your devices IP to static. Set 192.168.188.250 as the device IP and
192.168.188.253 as the gateway IP address.
Easiest install is using Gateway mode (as above)
App for finding spare Wi
-
Fi channels is Wi
-
Fi Analyzer (Apple or Android)
App for searching on networks for IP is FING (Apple or Android)
Reset back to default by holding front button for 15 seconds.