For permanent installations to the mains supply, it is necessary to conform to the regulations of the local
electricity authority and this would include the use of a metal or plastic conduit to protect the cable.
Attention has been drawn to the fact that special rules may exist concerning the installation of your
pond UVC (i.e. local building regulations).
This UVC must not be used in swimming pools, or areas where people are in contact with the water.
Always disconnect the mains electricity supply whilst the equipment is being installed, repaired,
maintained or handled. Consult a qualified electrician if in any doubt about wiring this product to
the mains supply.
Your Midipond filter has been designed to
need a minimum of maintenance.
When the filter system is first installed filter
cleaning may be increased for a period until
the back log of accumulated pond waste is
removed.
IMPORTANT:
Please note all electrical work on garden lighting and power installations must
comply with part P of the building regulations. Failure to comply is a criminal offense. If the
installation of this product is not carried out by a competent electrician who is registered under
the Part P self-certification scheme then you must notify the local building control department
before work begins. For further information and guidance on this matter and other electrical
installations in your home that might be covered by the relevant legislation, contact your local
authorities building control department.
ELECTRICAL INSTALLATION
MAINTENANCE & CLEANING
8
WARNING:
A Residual Current Device (RCD), also known as the Residual Current
Circuit Breaker (RCCB), with a tripping current not exceeding 30mA must be installed
in the supply circuit. A means of disconnection from the supply having a contact
separation of at least 3mm in all poles must be incorporated in the fixed wiring.
B
A
FILTER
CLEANING
17.562 Blagdon_Midipond filter instructions_20000/28000 AW.indd 11
17/07/2017 16:35
