Blagdon 1057233, Manual

Page: 5 / 12

2. Pump assembly.
1. Attach the pump outlet adaptor to the pump.
2. Connect the flow control valve to the pump outlet adaptor – this will allow you to adjust the water flow (not
required for deep water/floating).
3. Connect the correct amount of extension tubes to raise the outlet above the water surface. (For deep water/
floating installation only one extension will be required)
4. Push the top extension pipe through the LED ring.
5. Connect the fountain head adaptor to the end of the top extension pipe.
6. Attach your chosen fountain head – if you have chosen the single jet, it can simply be connected to the
extension pipe in place of the fountain head adaptor.
Deep water/floating only:
• After attaching the extension pipe to the pump, push the pipe through the hole cut out on the float prior to
installing the LED.
• Fill the supplied mesh bag with gravel, and attach to the pump using the string – adjust the length according
to the depth of the pond in the location you would like the pump to be.