8
FAULTS - PROBLEMS PROCEDURE
Before returning your Blagdon Pond and Garden LED Feature Light to your dealer or
contacting our Consumer Advice Department, please carry out the following steps.
This will solve most problems quickly and easily.
1.
Ensure electrical procedure has been followed fully.
Check fuse and any cable connectors/switch boxes.
2.
Return light to point of purchase for inspection and advice
(you may need proof of purchase).
You can help protect the environment. Please remember to respect the local regulations:
hand in non-working electrical equipment to an appropriate waste disposal centre.
Consumer Advice contact details
Interpet (Blagdon) Consumer Advice Department
Vincent Lane, Dorking, Surrey RH4 3YX
Fax:
01306 876712
E-mail:
IMPORTANT
This guarantee is offered as an extra benefit and does not affect your statutory rights
as a consumer in any way. This product is guaranteed against defects in material and
workmanship for 3 years from the date of purchase, under normal usage.
The guarantee
DOES NOT APPLY in case of improper use,
negligence, lack of maintenance or accidental
damage either to the lights, transformer or to the replaceable parts. If the lights or transformer
fail due to a manufacturing fault within this period it will be either repaired or replaced free
of charge. Liability is limited to replacement of the faulty product only, no other costs will
be reimbursed. This guarantee is not transferable and does not affect your statutory rights.
This guarantee does not confer any rights other than those expressly set out above.
Excludes lamps, O rings, coloured lenses or washers.
GUARANTEE
MAINTENANCE
9
Before any operation, turn off the spotlight and disconnect the mains from the
power socket. The spotlight can now be removed from the pond. Unscrew the
lamp cover
(1)
to remove the transparent glass
(2)
and associated O ring
(3)
.
When the spotlight has been dismantled in this way, the LED lamp
(4)
can be
removed and replaced. Reassemble in the reverse order.
LED Automatic Photo Sensor
Detects when light levels are low/dusk
The LED automatic sensor is positioned on the side of the LED main body
(8)
. Ensure
this is kept clean from dirt and algae as it needs sufficient light to activate correctly.
The optional sensor cover
(9)
can be used to cover the sensor; this would allow the
LED to be continuously on during both night and day. Simply uncover the sensor
for it to continue working as before.
This extremely efficient
lamp uses less than
1 watt of electricity which
automatically turns on at
dusk and off at dawn.
8
1
2
3
4
9
9
LED Sensor Uncovered
= On/Off Automatic
LED Sensor Covered
= On all the time
