10
Adjusting the Seat Height
1. Remove the seat height adjustment pin and
loosen the seat stabilizer knob. (As shown by
arrows)
2. Select the desired height adjustment and insert
seat height adjustment pin and tighten the seat
height stabilizer knob.
4. Replace seat as shown in figure 3.
Removing the Battery Pack
1. To remove the battery pack, pull up on the
handle. (As shown by the arrow) The battery
pack will lift up away from the vehicle.
You may also remove the battery pack and
charge the batteries separate from the unit.
Removing the Rear Wheel/Motor Assembly
1. Once the battery pack is off, you will be able
to remove the rear wheel/motor assembly
from the vehicle.
2. Remove the frame pin and disconnect the
power cable connector. (See arrows)
The rear wheel/motor assembly will slide out
from the front foot deck assembly.
Summary of Contents for Sport DKS200
Page 1: ......
