11
GETTING STARTED CONTINUED
SAFETY KEY & CLIP
Your Bladez treadmill is equipped with a safety key that will disable the treadmill if it is
not in place. You should attach the clip end to your clothing. The magnet end goes into
the recess of the console. If at any time you need to stop the treadmill quickly simply
pull the safety key off the console. This will cut all power to the treadmill and it will
come to a complete stop. To resume your workout, place the safety key back in place.
You will then need to program your workout again.
BEFORE STARTING
Straddle the running belt and stand on the plastic side rails. Insert the safety key and
attach the rope to your clothing. Do not stand on the walking belt while starting or
stopping the treadmill.
QUICK START
1.
Turn on POWER
2.
Press START. The running belt will start to move at 0.5 MPH.
3.
Adjust Speed with the
keys.
4.
Adjust Incline with the
keys.
TO STOP
1.
Step off running belt onto the plastic side rails
2.
Press STOP. The running belt will stop
Note: For an immediate stop, pull out the safety key from the safety key
recess and the treadmill will stop abruptly.
MANUAL PROGRAM SET UP
1.
Turn on POWER
2.
Press MODE key ~ Manual light will be flashing
3.
Press ENTER key ~ Time will be flashing.
4.
Adjust time with the keys.
5.
Press START
6.
Adjust Speed with the keys.
7.
Adjust Incline with the keys.
