4
8. Trigger 1
9. Trigger 2
10. Main power switch
11. AC Line connector and Fuse Holder
The Grendel is equipped with 2 trigger jacks (3.5mm monotype miniature
phone jack). The TRIGGER allows you to control other products with a
sensor, by the Grendel amplifier. The centre pin of each jack is the signal-
sense and signal-drive. We recommend that you use a good quality cable
with shielding when attaching your trigger cables so as to prevent false
triggering of the amplifier due to electro-magnetic interference from nearby
electronic equipment.
The TRIGGER allows you to have an external signal turn on the Grendel
amplifier from standby. This signal must be a continuous signal in order to
keep the amplifier in the on state (5V or 12V signal). Once you remove the
signal the amplifier will return to standby. The TRIGGER can be used with
both 5 and 12 volt trigger systems for maximum versatility.
NOTES:
•
Check the specifications of the trigger input terminal on the other components to
ensure that they are compatible with the Grendel amplifiers.
•
All
continuous