EN
6
System Settings
Flight Settings
Battery Info:
Allows the user to check the current capacity of
the transmitter battery and to monitor the power usage of
the various functions of the transmitter.
Language Select:
Allows the user to change between avail-
able languages.
System Reset:
Resets the transmitter to the factory defaults.
Date and Time:
Allows the user to change the time and how
it displays as well as select the time zone.
About Flight Mode:
Provides the user with the model and
serial numbers and allows system software updates.
Bind
Bind Model
To bind your aircraft receiver with the ST-10+:
1. With the transmitter powered off, put the aircraft in
bind mode.
2. Power on the ST-10+. If the RC and Wi-Fi connecting
dialogue appears, touch the screen anywhere outside
of the pop up window to access the main menu.
3. Touch the “Model Select” button from the main
menu. Click “OK” in the warning dialogue.
4. Select your model or create a new model if needed.
5. From the main menu, select “Flight Settings” and
click “OK” in the warning dialogue.
6. Select “Bind” and select your model from the list.
7. Click “OK” after the connection has been established.
8. Return to the main menu. Your model should now
connect to the ST-10+.
Bind Camera
To bind your camera to the ST-10+:
1. Power on the camera/gimbal.
2. Select Flight Settings from the main menu on the
ST-10+.
3. Select the Bind option.
4. Under Camera, select the CGO2 network
(CGO2_******).
5. Touch the Password line on the screen and enter the
password “1234567890” on the touchscreen.
6. Select OK.
7. The ST-10+ will indicate a successful connection.
Select OK.
8. Return to the Main Menu.
9. The live video feed is now visible on the ST-10+
display.
10. Double tap on the image to expand the video to fi ll
the display. Double tap again to return to the main
menu with live video.
Camera Select
To select a camera:
1. Choose the desired camera from the list of camera
profi les and click “Select.”
2. Click “OK.”
3. Return to the main menu.
NOTICE:
Streaming video from a camera/gimbal to the
ST-10+ and to a separate phone/tablet (or another Yuneec
transmitter/personal ground station) at the same time is
not recommended as it will result in a very signifi cant lag
in the video downlink.
Mode Select
Select the desired transmitter control mode from the list.
Mode 2 is the default control mode.
Hardware Monitor
The hardware monitor gives a graphic representation of all
current control input positions.
Other Settings
Units
Change the units to either Metric or Imperial.
Throttle
Rudder/Yaw Elevator/Pitch Aileron/Roll
Mode 1
Left Transmitter Stick
Right Transmitter Stick
Mode 2
(Default)
Mode 3
Mode 4
