Blade HCFM-1 User Manual Download Page 4

Page: 4 / 5

Step 5:

Leve

the unit so that the bolt goes into the

keyhole.

NOTE:

Unit should never be mounted off the floor.

MAINTENANCE

CAUTION:

Before carrying out any maintenance or

servicing, ensure the unit is disconnected from the main
supply.

NOTE:

Wear proper personal protective equipment for

handling used filtration elements. A medical grade mask
and nitril gloves are strongly recommended.

Maintenance required:

1) HEPA Filter - 4,380 running hours (6 months, if

run 24/7)

2) Carbon Filter - 8,760 running hours (12 months, if

run 24/7)

3) Pre-Filter - 8,760 running hours (12 months, if run

24/7)

Ensure castors are in the lock position.

Unfasten tamperproof screws securing top hood.

Remove the four nuts securing down the carbon filter.

Summary of Contents for HCFM-1

Page 1: ...r Purifier Rev 1 0 www bladeair com TABLE OF CONTENTS Safety Notice 1 Installation and Operation 2 Initial Installation 2 Operating 2 Optional Speed Controller 2 Optional Wall Mounting 3 Thick Drywall 3 Mounting to a Stud 4 Maintenance 6 ...

Page 5: ... carbon filter NOTE Ensure the airflow direction indicator on the side of the HEPA is facing the upward direction Secure four nuts to compress filter elements Close the unit and resecure the hood with the screws Pre filters can be changed by sliding them out and in of the side of the unit Maintenance complete 6 ...