EN
14
Tail Assembly (T)
1. Check the belt tension just behind the main gear at
the rear of the side plate opening. Push inward on
the belt from the side with moderate pressure. The
belt should not defl ect more 4mm.
2. Set the tail belt tension by applying pressure against
both tail side plates towards the rear of the aircraft.
Fully tighten the eight 3x10mm screws holding the
tail side plates to the rear boom mounts.
1. Insert the metal sleeve of the tail pushrod into the
pushrod guide.
2. Secure the pushrod guide with a socket head cap
screw.
3. Snap the front tail pushrod linkage onto the tail
servo arm.
4. Snap the rear pushrod linkage onto the tail rotor
pitch lever.
Step T6
Step T7
