8
EN
RTF
Change fl ight modes by pushing down on the right stick. Ensure the fl ight mode switch is in the
desired position before fl ying.
• In Stability mode (switch position 1), the controls provide a minimum bank angle. This mode
is shown by the fl ight control LEDs on the quadcopter glowing solid blue.
• Agility mode (switch position 2) is shown by the fl ight control LEDs on the quadcopter
glowing solid red.
If you purchased a BNF Ozone
™
quadcopter, the channel 5 switch on your transmitter will select fl ight modes.
Flight Mode Selection
LED Codes
Equipment
LED Color
LED Status
Operation
Quadcopter:
Flight control LEDs on
the control board
Blue
Solid
Stability mode, switch position 1
Blinking
Loss of RF / Transmitter OFF
Red
Solid
Agility mode, switch position 2
Blinking
Low Battery
White
Blinking
Disarmed, Ready
Quadcopter:
Outer motor pod LEDs
White (Front)
Red (Rear)
Slowly Dim and Brighten
In relation to throttle input
