3
EN
Table of Contents
Visit www.bladehelis.com to register your helicopter
Introduction
As you are about to see, the Blade Nano CP X is an ultra micro heli experience unlike any other. The agility of the
advanced AS3X
®
(Artificial Stabilization – 3-aXis) Flybarless System and its feather-light airframe eclipse that of just
about every other heli its size. Inverted flight, loops, flips, rolls, funnels, hurricanes – the Nano CP X will do it all.
If you’re transitioning from a basic CCPM or fixed-pitched heli, you’ll find the Nano CP X is a great way to get comfortable
flying aerobatic CCPM helis without having to invest a lot in expensive equipment or repairs. Its AS3X Flybarless System
delivers a perfect balance of agility and stability that lets you explore your limits at your speed.
Before you start flying, though, please take time to read through this manual. It contains important pre-flight information
and useful tips that will help ensure your first flight, and every one after it, is the best it can be.
Length
7.75 in (197mm)
Height
3.10 in (79mm)
Flying Weight
1.00 oz (29 g)
Main Rotor Diameter
7.75 in (197mm)
Tail Rotor Diameter
1.60 in (40mm)
Blade Nano CP X Specifications
*Transmitter not included with BNF Version
Charging Warnings ............................................................4
Battery Charging ...............................................................4
AS3X Flybarless Helicopter Technology ...............................5
First Flight Preparation ......................................................5
Flying Checklist .................................................................5
Programming Your Transmitter ...........................................5
Transmitter and Receiver Binding .......................................7
Understanding the Primary Flight Controls ..........................8
Throttle Hold .....................................................................9
Stunt Mode .......................................................................9
Installing the Flight Battery ..............................................10
Low Voltage Cutoff (LVC) ..................................................10
Flying the Nano CP X .......................................................10
Troubleshooting Guide .....................................................11
Exploded View and Parts Listings .....................................12
Limited Warranty .............................................................14
Warranty and Service Contact Information ........................15
Customer Service Information ..........................................15
FCC Information ..............................................................16
Compliance Information for
the European Union .........................................................16
RTF
BLH3300
BLH3380
Blade Nano CP X Features
Ready To Fly
Bind-N-Fly
Airframe –
Blade
Nano CP X
Included
Included
Main and Tail Motors –
Brushed
Installed
Installed
On-board Electronics –
Flybarless 3-in-1 Control Unit, RX/ESCs/
Gyros
Installed
Installed
Battery –
150mAh 1S 3.7V 25C LiPo Battery
Included
Included
Charger –
1-Cell 3.7V 0.3A DC Li-Po Charger
Included
Included
Transmitter –
Requires a
DSMX
®
Compatible Transmitter
DX4e Included
Sold Separately
Transmitter Batteries –
4 AA
Included
Sold Separately
