38
6. Installation
1. Select the installation location and wipe up the installation area.
2. It is recommended to install the product in between a room mirror and a front mirror. Make sure that the product does not interrupt
the operation of a room mirror and cover the view.
3. Remove the vinyl on double sided tape and attach it to the front glass firmly.
4. Push the Car DVR to adjust its angle. (15 degrees in downward)
5. Connect the rear cable cord into the Car DVR. (Make sure that the rear cable is connected when the Car DVR is turned off)
6. If necessary, connect AV cable to the Car DVR and the navigation AV IN port.
7. Connect the cigar jack code into the Car DVR.
8. Check whether a memory is inserted into the Car DVR.
9. Connect the cigar jack power to the cigar jack of a vehicle. (Cigar jack power must be connected at the last)
10. Cigar jack cable, AV cable and rear camera connection cable should be cleaned up.
11. If the Car DVR is connected to Normal power, it should be installed with help of an installation expert.
Summary of Contents for BL-100
