15
14
English
English
3. CabRig Switch
Use this to switch between the three CabRig settings currently stored in the
pedal. You can customise the three factory patches using the CabRig section of
Blackstar’s Architect software.
4. Level Control – CabRig Outputs
This control allows quick access, physical control over the XLR, Line Out and USB
audio channel 3 output level. At maximum (fully clockwise), this control has no
effect on the signal level. At minimum (fully anti-clockwise), this control attenuates
the signal on these outputs by 20dB.
CabRig
To access edit CabRig settings you will need Blackstar’s Architect software.
Download Architect from the Blackstar website:
https://blackstaramps.com/architect
Cabinet Channel Strip
1. Cabinet Selection
Select your virtual cabinet using the Cabinet Selection panel. Choose from 23
distinct speaker cabinets or select DI (Direct Injection) for the direct power amp
output.
NOTE:
For use with 3rd party IR (Impulse Response) loaders, select the DI option.
The DI is taken from after the power amp.
1. Microphone Selection
Mic up your virtual cabinet with a choice of 6 industry standard microphones.
Toggle the axis of your microphone choice for a different tonal flavour. In general,
OFF AXIS will darken your tone and shift the mid-range character.
Ring
Screen
Tip
Left channel
to mixer
Right channel
to mixer
1
2
3
