Revision 2.00 / LB-0889
– CerePlex Exilis: Instructions for Use
© 2019 Blackrock Microsystems, LLC
15
oriented 90° from each other allows for reliable data recording (see Automatic Wireless
Data Validation, Page 17). See
for a model antenna placement scheme for
this condition.
9. In setups where the CerePlex Exilis IS expected to move throughout the entire
enclosure, it is beneficial to ensure the entire enclosure gets maximum antenna
coverage. See
for a model antenna placement scheme for this condition.
10. Every experimental setup is unique. Adjust your antenna orientation, location, and
distance while observing the blue antenna indicator lights on the receiver to achieve the
best placement for your setup.
11. For guidance on antenna placement, contact Blackrock Support at
Assembling the Wireless System
1. Connect the 12 V power supply to the receiver.
2. Connect the HDMI-A cable to the receiver as well as the digital hub or CerePlex Direct.
3. Launch the Central Software Suite on the host PC.
4. Power on the components of the Blackrock data acquisition system
—the digital hub and
NSP when using the Cerebus system, or the CerePlex Direct if using the CerePlex
Direct system. Refer to the associated data acquisition system product manuals as
needed.
5. Connect the CerePlex Exilis headstage to the pedestal connector on the Blackrock
.
Note:
The DNSS is not included in the system and needs
to be purchased separately.
Figure 12
–
Wireless antenna placement scheme for
animal with restricted movement.
Figure 13
–
Wireless antenna placement scheme for
animal with unrestricted movement.
