Revision 2.00 / LB-0889
– CerePlex Exilis: Instructions for Use
© 2019 Blackrock Microsystems, LLC
12
Receiver and Antennas
The CerePlex Exilis receiver can
use up to 8 antennas (
).
to
acquire data from the CerePlex
Exilis headstage. The receiver
requires a robust signal from only
one antenna to reliably receive the
transmission. If signal strength
declines from one antenna, the
receiver will cycle through the
remaining antennas to find an
optimal signal. In this way, the 8
antennas can be used to cover a
larger operational area than would
be possible with a single antenna.
The receiver will display a blue
indicator LED on the front panel to
indicate an antenna receiving valid
data.
Figure 7
–
Receiving antenna used with the CerePlex
Exilis system.
Figure 6
–
Reference selection matrix.
“
A
”, “
B
”, “
C
”: Reference wires from Bank, A, B, C Omnetics connectors. “
G
”: Ground
reference. “
R
”: Custom reference.
Default Reference setting: Bank B, A, C have independent references: B, A, C.
Bank B reference
Bank A reference
Bank C reference
Not recom
mended switching positions for switch “SR”
“
X
”: Uncertain reference selection, depends on “SR” switching position and reference
impedance.
