Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 43 / 969

The Setup page in the Blackmagic Teranex Setup utility provides
motion control, selection of video test patterns and audio test tones
Advanced Menu
Your Teranex processor provides the following advanced cadence correction features:
Clean Cadence for Teranex 2D and 3D
The clean cadence feature creates a clean 3:2 pull down sequence in your 59.94 output video.
Setting Clean Cadence
Turn ‘clean cadence’ on or off using the soft menu buttons and rotary knob.
‚
On
Selects the ‘clean cadence’ mode
‚
Off
Selects the ‘normal video’ mode
The default mode is ‘off’
‘Clean cadence’ is available for the following format conversions:
‚
486i59.94 to 486i59.94
‚
486i59.94 to 1080i59.94
‚
1080i59.94 to 486i59.94
‚
1080i59.94 to 1080i59.94
TIP Use the ‘clean cadence’ mode when you are certain your source material was
originated with a 3:2 pulldown sequence, such as film transferred to video by a
telecine. If ‘clean cadence’ is used on video without 3:2 pulldown, unwanted artifacts
may be seen.
Video
Advanced
Proc
Amp
Test
Patterns
Aspect
Setup
Clip
Color
Video Menu>Advanced
On
Advanced
FRC
Aperture
Source
Type
Scene
Detect
Clean
Cadence
Off
Advanced Menu>Clean Cadence
43 43 Teranex Processor Settings