Blackmagicdesign MultiDock Installation And Operation Manual Download Page 14

Safety Information

For protection against electric shock, the equipment must be connected to a mains socket 
outlet with a protective earth connection. In case of doubt contact a qualified electrician.

To reduce the risk of electric shock, do not expose this equipment to dripping or splashing.

Product is suitable for use in tropical locations with an ambient temperature of up to 40

o

C. 

Ensure that adequate ventilation is provided around the product and that it is not restricted.

When rack mounting, ensure that the ventilation is not restricted by adjacent equipment.

No operator serviceable parts inside product. Refer servicing to your local Blackmagic Design 
service center.

Use only at altitudes not more than 2000m above sea level.

State of California statement

This product can expose you to chemicals such as trace amounts of polybrominated biphenyls 
within plastic parts, which is known to the state of California to cause cancer and birth defects 
or other reproductive harm.

For more information go to www.P65Warnings.ca.gov.

14

Safety Information

Summary of Contents for MultiDock
















Reviews: