Fairlight Panel Setup
Fairlight Panel Setup can be connected to the Fairlight module via USB or Ethernet using DHCP.
If you are not using a DHCP server, you can set the network settings to a fixed IP address via
USB. More information for changing network settings is provided later in this manual.
When configuring the Fairlight console for your studio, the first step is to name each module
using the Fairlight Panel Setup utility. This lets you easily identifiy each panel module by clicking
on the 'identify me' checkbox.
To name each module:
1
Launch the Fairlight Panel Setup utility.
The currently selected module will be visible on the setup
utility home screen. Navigate to each installed unit by clicking
on the arrows on each side of the home screen
2
Select a module on the home screen and click on the settings icon. You can also click
on the module's image to open the settings window.
3
Click on the 'configure' tab. Under 'device name' you will see a 'label' text box.
Change the name in the text box and click 'save'. You can visually identify each module
installed in your console by clicking on the 'identify' checkbox. This will illuminate
features on the module.
17
Configuring the Fairlight Modules
