184
Studio
Camera
Control
Protocol
Padding
(uint8[])
Messages must be padded up to a 32 bit boundary with 0x0 bytes.
Any padding bytes are NOT included in the command length.
Receiving devices should use the destination device address and/or the command identifier to
determine which messages to process. The receiver should use the command length to skip
irrelevant or unknown commands and should be careful to skip the implicit padding as well.
Defined
Commands
Command
0:
change
configuration
Category
(uint8)
The category number specifies one of up to 256 configuration categories
available on the device.
Parameter
(uint8)
The parameter number specifies one of 256 potential configuration
parameters available on the device. Parameters 0 through 127 are
device specific parameters. Parameters 128 though 255 are reserved for
parameters that apply to multiple types of devices.
Data
type
(uint8)
The data type specifies the type of the remaining data. The packet length is
used to determine the number of elements in the message. Each message
must contain an integral number of data elements.
Currently defined values are:
0:
void
/
boolean
A void value is represented as a boolean array of length zero.
The data field is a 8 bit value with 0 meaning false and all other values
meaning true.
1:
signed
byte
Data
elements
are
signed
bytes
2:
signed
16
bit
integer
Data
elements
are
signed
16
bit
values
3:
signed
32
bit
integer
Data
elements
are
signed
32
bit
values
4:
signed
64
bit
integer
Data
elements
are
signed
64
bit
values
5:
UTF-8
string
Data elements represent a UTF-8 string with no terminating character.
Data
types
6
through
127
are
reserved.
128:
signed
5.11
fixed
point
Data elements are signed 16 bit integers representing a real number with
5 bits for the integer component and 11 bits for the fractional component.
The fixed point representation is equal to the real value multiplied by 2^11.
The representable range is from -16.0 to 15.9995 (15 + 2047/2048).
Data
types
129
through
255
are
available
for
device
specific
purposes.
Operation
type
(uint8)
The operation type specifies what action to perform on the specified
parameter. Currently defined values are:
Summary of Contents for Design 3G-SDI Arduino Shield
