manualshive.com logo in svg

Blackmagicdesign Blackmagic URSA, Installation And Operation Manual, Page: 22 / 40

Share
Download
Blackmagicdesign Blackmagic URSA Installation And Operation Manual Download Page 22

Camera Features

22

Touch Screens

Each work station features a touch screen so you can monitor your recordings, view scopes, apply settings 
and activate camera features.

By pressing the Disp button you can switch between viewing your clips during recording and playback, 
or viewing scopes and status information. Scopes are provided to assist with focusing, setting exposure 
and audio monitoring.

Touch Screen Features

Status Strip

Your chosen settings are always displayed on a status strip at the top of each touch screen, showing a 
convenient summary of your camera's settings.

Power Indicator

The power indicator displays a battery icon when using battery power, or an external power icon when 
plugged into external power via the 12-20 Volt XLR input.

Duration Display

The duration display provides a timecode counter for checking the duration of your clips and 
monitoring timecode during recording and playback. The counter displays a time sequence showing 
Hours:Minutes:Seconds:Frames and will progress through the sequence as you record or play back clips.

The displayed duration of each clip starts from 00:00:00:00 for the first clip, or from the end of the 
previous recorded clip. For example, if a clip stopped recording at 00:06:25:00, the next clip will start 
recording at 00:06:25:01.

Clip duration is displayed on the touch screen, however time of day timecode is embedded into your 
clips for post production, so it's worth regularly checking the time settings in the Camera settings menu 
to make sure they are always accurate.

When external timecode is connected to the Timecode In rear panel connector, external timecode 
is displayed.

Camera settings can be accessed using the the touch screen 
menus. Press the Menu button to open the touch screen 
settings. Navigate the settings by touching the icons  
on the left side of the screen.

The touch screens provide scopes to help set optimum 
exposure, focus and audio quality. The battery indicator is 
replaced by an external power icon when external power is 
plugged into the 12-20V XLR input.

Summary of Contents for Blackmagic URSA









































Reviews:

No comments